background image

2

In this kit you will find the following:

• Acoustical fiber optic panels

• Epic Link

JGPSEFSFE

• Lead / Booster Wire(s)

• RJ45 Quick Connect Cables

• Power Supply

• High Powered Magnets

• Spacers*

• Screws

• Marking Pencil

* Some installers use spacers for standard installation requiring more room for wires.

Note: 

Sometimes there will be more than one lead wire and sometimes the wire(s) will already be attached to the power supply. 

Lead wires are also used as booster wires to power over 19 panels. (see diagrams on page 3 and 4) 

For a smooth installation we highly recommend the following:

• Painters tape or a light adhesive

masking tape to organize cables

• Appropriate screw anchors for your

installation surface (drywall anchors supplied)

• Ladder

• A work buddy

Note: 

Voltage on power supplies varies on the number of panels you are installing. The power supply provided in this package by Epic 

Sky was determined by your job specifications.

Fiber Optic Star 

Lighting Systems

Congratulations on your purchase 

of your new star panel system!

PACKAGE CONTENTS

WHAT YOU WILL NEED

AWARD

WINNER

.

Содержание Fiber Optic Star













Отзывы: