Questions? Call Toll Free at 1-800-737-2112
Copyright © 2014 MAT Engine Technologies, LLC
ENG - 19
Warranty
(Continued)
Manufacturer’s Warranty Coverage
The emissions control system is warranted for two years. If any emissions-related part on your engine is defective, the part will be re-
paired or replaced by
METL
.
Owner’s Warranty Responsibility
As the power equipment engine owner, you are responsible for the performance of the required maintenance listed in your owner’s
manual.
METL
recommends that you retain all receipts covering maintenance on your power equipment engine, but
METL
can not deny
warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance.
As the power equipment engine owner, you should however be aware that
METL
may deny your warranty coverage if your power equip-
ment engine or a part has failed due to abuse, neglect, improper maintenance or unapproved modifications.
You are responsible for presenting your power equipment engine to a distribution center or service center authorized by
METL
as soon as
the problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days.
If you have any questions regarding your warranty rights and responsibilities, you should contact
MAT Engine Technologies, Inc.
6700 Wildlife Way
Long Grove, IL 60047
Tel: 1-800-737-2112
Owner’s Warranty Responsibility
METL
warrants that the product engine is free from defects in materials and workmanship which cause such engine to fail to conform
with the U.S. EPA or State of California emissions standards for small spark-ignited nonroad (off-road) engines – as applicable to your
HCP product. Small spark-ignited off-road engines manufactured after January 1, 1995 and sold in the State of California and U.S. EPA-
certified small spark-ignited nonroad engines manufactured in model year 1997 or later and sold in all of the United States are covered
by this Emission Control System Warranty for a period of two years from the date of delivery to the original purchaser. This Emission
Control System Warranty is transferable to each subsequent purchaser for the duration of the warranty period. Emission Control System
Warranty repairs or replacements will be made without charge for diagnosis, parts or labor. A list of warranted parts is provided below.
Normal maintenance items, such as spark plugs, air filters and fuel filters that are included on the list of warranted parts are warranted
only up to the first scheduled required replacement interval for such item, as set forth in the Operator’s Manual. If any emission control
system part is repaired or replaced under the Emission Control System Warranty, it shall be warranted for the remainder of the applicable
warranty period.
METL
will also repair or replace other engine components damaged by a failure of any part covered by the Emission Con-
trol System Warranty during the Emission Control System Warranty Period. Only parts authorized and approved by
METL
may be used
in the performance of any Emission Control System Warranty repairs or replacements and will be provided without charge to the owner.
Unapproved, add-on, modified, counterfeit and/or “gray market” parts may not be used to modify or repair the
METL
engine. If such a part
has been used in the repair or maintenance of your engine, and an
METL Authorized Service Center
determines it is defective or causes a
failure of a part covered under the Emission Control System Warranty, your claim for repair of your engine or product may be disallowed.
METL
shall not be held liable hereunder for failures of any warranted parts caused by the use of such an unapproved, add-on, modified,
counterfeit and/or “gray market” part.
How to Obtain Warranty Service
You must take your power equipment engine or the product on which it is installed, along with evidence of the date of the sale to the
original purchaser, at your expense, to any
METL Authorized Service Center
during its normal business hours. To locate your nearest
METL
Authorized Service Center
, call (800) 737-2112. The product owner shall be responsible for any expenses or charges incurred for service
calls or transportation of the product or equipment engine to and from the
METL Authorized Service Center
, including any and all damages
or losses incurred during such transportation or shipment.
