Indicates WARNING, DANGER, or
CAUTION.
This equipment can throw small objects
at high speed causing personal injury.
Inspect area where used and remove
all foreign objects.
Read operator’s manual before
operating this machine. Failure to
follow directions could result in serious
injury.
Engine exhaust contains carbon
monoxide, an odorless and deadly gas.
NEVER run unit indoors or in a poorly
ventilated area.
Always wear eye protection that meets or
exceeds the requirements of ANSI Z87.1.
Wear hearing protection.
Wear breathing protection.
To reduce risk of fire, clean spilled gas
and oil and keep unit free from debris.
Gasoline is extremely flammable. Allow
machine to cool completely before
refueling.
Do not use if children or bystanders
are present.
Extremely hot surface. Do not touch
a hot muffler, gear box or cylinder,
you may get burned. These parts get
extremely hot from operation and
remain hot for a short time after the unit
is turned off.
Keep hands, feet, and clothing away
from rotating tines. Contact with
rotating tines may result in serious
injury.
Safety Definitions
• Save all instructions
Safety Warning Symbols:
Control and Operating Symbols:
Choke Control:
Run/Warm Start
Choke/Cold Start
Fuel Mixture
40:1
Unleaded Gas: 2 Cycle Oil
Caution: Do Not Use Gas
Mix with More Than 10%
Methanol or Ethanol
Fuel Mixture:
40:1
(Unleaded Gas : 2 Cycle Oil)
Fuel Primer:
Press 6 times.
Throttle Control:
SLOW
FAST
Ignition Switch:
ON/RUN
OFF/STOP
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury
or equipment/property damage
DANGER
CAUTION
WARNING
The information listed below should be read and understood by the operator. We utilize the symbols below to allow the
reader to recognize important information about their safety.
Safety Alert Symbols
Questions? Call Toll Free at 1-800-737-2112
1
Copyright © 2009 MAT Engine Technologies, LLC
Important
Safety
Information
