Part 3 Operation
3.2
Manual Range Output Adjustment
The EMD-570 is preconfigured from the factory with a single manual range for the analog output.
Without specifying, the transmitter is preset to 0 - 100ppm. It can be set to any of the 5 ranges:
Range 1
0 - 10 ppm
Range 2
0 - 100 ppm
Range 3
0 - 1000 ppm
Range
4 0
-
1%
Range 5
0 - 25%
If the user wishes to adjust the analog output range, the user will need to re-
move the front panel overlay (2 screws on either side of the display and the nut
over the span knob). Once removed, the user will need to use a soldering iron, re-
move the solder pad (shorting) from the current range, and re-solder to a new range.
