USING YOUR DEHYDRATOR
1.
Plug in your dehydrator.
2.
The power light will come on after the power switch is turned to “ON”. The unit is ready to operate.
3.
Turn the knob to “ON”, the convection fan will begin circulating air. Turn the thermostat dial to “ON” and the
heating element will start heating the unit.
4.
When the timer reaches zero it indicates that the products have finished drying.
5.
Unload the dehydrator.
6.
Please use caution when removing the products from the dehydrator.
WARNING!
•
During the dehydration process, make sure that no metal utensils come into contact with the electrical fan
or heating elements.
•
Foods dehydrated in this unit will be hot, please wear protective hand coverings when reaching into the
dehydrator to lift out your food.
TIMER
The timer has a range of 0–12 hours. If you need to reset the dehydrating time while the dehydrator is in
operation. Turn the timer to your desired time. The dehydrator will reset the time according to the revised
requirement without needing to be turned off.
TEMPERATURE CONTROL KNOB
The thermostatic switch controls the temperature inside the dehydrator and helps to maintain the proper
temperature during various dehydrating applications.
CLEANING THE DEHYDRATOR
1.
Turn the unit off and wait for it to cool down.
2.
Unplug the cord from the wall.
3.
Clean and sanitise the rack supports, rack and door.
4.
Wipe and clean the interior of the unit using warm water and a damp cloth or sponge.
5.
Reassemble when dry.
