Southern States SSB-A, Руководство по установке

Страница: 15 / 28

Page 6 of 17
Receiving, Handling & Storage
Receiving, Handling & Storage
Receiving & Unpacking
Unpack the equipment and check for damages or shortages immediately. The bill-of-
material from the Unit Assembly (switch) and Operating Mechanism drawings should be
used for this purpose and can be found in the carboard tube housing inside the op mech
container. If damage or a shortage is noted, file a claim immediately with the carrier and
contact the factory.
Storage
All components of the SSB-T / SSB-A single side break disconnect switch are suitable
for outdoor use and do not have any special storage requirements. If a motor operator is
furnished be sure to connect the heater circuit, using the provided external wiring, while
the unit is in storage. Discard the wiring upon installation.
Typical crating is intended for storage less than 1 year. If long term storage is required
please notify factory at time of order placement so that special crating can be used.