background image

2

TABLE OF CONTENTS

Warranty ................................................ 2
Safety Rules .......................................... 3
Product Specifi cations ........................... 6
Assembly/Pre-Operation ....................... 8
Operation............................................. 11

Maintenance ....................................... 18
Maintenance Schedule ........................ 18
Service and Adjustments..................... 22
Storage ................................................ 27
Troubleshooting ................................... 28
Repair Parts......................................... 32

WARRANTY

Electrolux Home Products, Inc.
Outdoor Products Customer Service Dept.
250 Bobby Jones Expressway
Augusta, GA  30909  USA

In Canada contact:
Electrolux Canada Corp.
7075 Ordan Drive
Mississauga, Ontario 
L5T 1K6

LIMITED WARRANTY

The Manufacturer warrants to the original consumer purchaser that this product as 
manufactured is free from defects in materials and work man ship. For a period of two 
(2) years from date of purchase by the original consumer purchaser, we will repair or 
replace, at our option, without charge for parts or labor incurred in replacing parts, any 
part which we fi nd to be defective due to materials or workmanship. This Warranty is 
subject to the following limitations and exclusions.
1.   This warranty does not apply to the engine, other than EHP manufactured transaxle/

transmission components, battery (except as noted below) or components parts 
thereof.  Please refer to the applicable manufacturer's warranty on these items.

2.   Transportation charges for the movement of any power equipment unit or attachment 

are the responsibility of the pur chaser.  Transportation charges for any parts submit-
ted for replacement under this warranty must be paid by the purchaser unless such 
return is requested by Electrolux Home Products.

3.   Battery Warranty:  On products equipped with a Battery, we will replace, without 

charge to you, any battery which we fi nd to be defective in manufacture, during the 
fi rst ninety (90) days of ownership. After ninety (90) days, we will exchange the Bat-
tery, charging you 1/12 of the price of a new Battery for each full month from the date 
of the original sale. Battery must be maintained in accordance with the instructions 
furnished.

4.   The Warranty period for any products used for rental or commercial purposes is 

limited to 90 days from the date of original purchase.

5.   This Warranty applies only to products which have been properly assembled, ad-

justed, operated, and main tained in ac cor dance with the instructions furnished. This 
Warranty does not apply to any product which has been subjected to alteration, mis-
use, abuse, improper assembly or installation, delivery damage, or to normal wear of 
the product.

6.   Exclusions: Excluded from this Warranty are belts, blades, blade adapters, normal 

wear, normal adjustments, stan dard hardware and normal maintenance.

7.   In the event you have a claim under this Warranty, you must return the product to an 

authorized  service dealer.

Should you have any unanswered questions concerning this Warranty, please contact:

giving the model number, serial number and date of purchase of your product and the 
name and address of the authorized dealer from whom it was purchased.
THIS WARRANTY DOES NOT APPLY TO INCIDENTAL OR CONSEQUENTIAL 
DAMAGES AND ANY IMPLIED WAR RAN TIES ARE LIMITED TO THE SAME TIME 
PERIODS STATED HEREIN FOR OUR EXPRESSED WARRANTIES. Some areas do 
not allow the limitation of consequential damages or limitations of how long an implied 
Warranty may last, so the above limitations or exclusions may not apply to you. This 
Warranty gives you specifi c legal rights, and you may have other rights which vary from 
locale to locale.
This is a limited Warranty within the meaning of that term as defi ned in the Magnuson-
Moss Act of 1975.

For Parts Call K&T 606-678-9623 or 606-561-4983

www.mymowerparts.com

Содержание SP185H42STB

































Отзывы: