Southern States Southern States SP185H42YT Скачать руководство пользователя страница 8

Страница: 8 / 32

Your new tractor has been assembled at the factory with the exception of those parts left
unassembled for shipping purposes. To ensure safe and proper operation of your tractor
all parts and hardware you as sem ble must be tightened securely. Use the correct tools
as nec es sary to in sure proper tightness. Review the video cassette before you begin.

ASSEMBLY/PRE-OPERATION

TOOLS REQUIRED FOR ASSEMBLY

A socket wrench set will make assembly
easier. Stan dard wrench sizes you need
are listed below.
(1) 3/4" wrench (1) Pliers
(1) 9/16" wrench (1) Utility knife
(1) Tire pressure gauge
When right or left hand is mentioned in
this man ual, it means, from your point of
view, when you are in the op er at ing po si-
tion (seat ed be hind the steer ing wheel).

TO REMOVE TRACTOR FROM
CARTON

UNPACK CARTON

1. Remove all accessible loose parts and

parts boxes from carton.

2. Cut along dotted lines on all four pan-

els of carton. Remove end panels and
lay side panels fl at.

3. Check for any additional loose parts or

cartons and remove.

02617

INSTALL SEAT

Adjust seat before tightening adjustment
knob.
1. Remove adjustment knob and fl at

washer securing seat to cardboard
packing and set aside for assembly of
seat to tractor.

2. Pivot seat upward and remove from

the cardboard packing. Remove the
cardboard packing and discard.

3. Place seat on seat pan so head of

shoulder bolts are positioned over the
large slotted holes in pan.

4. Push down on seat to engage shoulder

bolts in slots and pull seat towards rear
of tractor.

5. Pivot seat and pan forward and as-

sem ble adjustment knob and fl at
washer loosely. Do not tighten.

6. Lower seat into operating position and

sit in seat.

7. Slide seat until a comfortable position

is reached which allows you to press
clutch/brake pedal all the way down.

8. Get off seat without moving its ad-

just ed position.

9. Raise seat and tighten adjustment

knob securely.

Seat Pan

Shoulder
Bolts

Seat

0281

Steering Wheel
Insert

Lock Nut

Large Flat
Washer

Steering Wheel

Steering
Shaft

Steering
Sleeve

Steering
Wheel
Adaptor

BEFORE REMOVING TRACTOR
FROM SKID

ATTACH STEERING WHEEL

1. Remove locknut and large fl at wash er

from steering shaft.

2. Position front wheels of the tractor so

they are pointing straight forward.

3. Slide the steering sleeve over the

steering shaft.

4. Position steering wheel so cross bars

are horizontal (left to right) and slide
onto steering wheel adapter.

5. Secure steering wheel to steering

shaft with locknut and large fl at wash er
pre vi ous ly removed. Tighten securely.

6. Snap steering wheel insert into center

of steering wheel.

7. Remove protective materials from trac-

tor hood and grill.

IMPORTANT:

Check for and remove any

staples in skid that may puncture tires
where tractor is to roll off skid.

For Parts Call K&T 606-678-9623 or 606-561-4983

www.mymowerparts.com

Содержание Southern States SP185H42YT

































Результаты поиска

Содержание Southern States SP185H42YT

Отзывы:

Бренды по названию

Популярные бренды

Southern States Southern States SP185H42YT, Руководство оператора

Результаты поиска

Содержание Southern States SP185H42YT

Отзывы:

Бренды по названию

Популярные бренды