manualshive.com logo in svg

Southern Pride SRG-400, Руководство пользователя, Страница: 14 / 38

Поделиться
Скачать
Southern Pride SRG-400 Скачать руководство пользователя страница 14

 

14 of 38                     

Copyright 2015 by Southern Pride Distributing, LLC    Volume 1

 

GAS CONNECTION INSTRUCTIONS 

 

For smokers equipped with casters, the installation shall be made with a connector that complies with the 

Standard for Connectors for Movable Gas Appliances, ANSI Z21.69 CSA 6.16, and a quick-disconnect device 

that complies with the Standard for Quick-Disconnect Devices for Use With Gas Fuel, ANSI Z21.41 CSA 6.9. 

Adequate means must be provided to limit the movement of the appliance without depending on the connector 

and the quick-disconnect device or its associated piping to limit the appliance movement. 

The restraining device may be attached using the mounting hole provided on the rear of the smoker.  Refer to 

page 6 to locate the mounting hole and page 15 for the installation instructions. 

WARNING: Operator should be aware that a restraint device is in place on smokers equipped with 

casters. If disconnection of the restraint is necessary, it must be reconnected after the appliance has been 

returned to its originally installed position.  

 

 

IMPORTANT ITEMS TO CHECK BEFORE FIRING THE BURNER  

1. Gas 

line 

MUST 

be installed by a qualified technician and in accordance with this Manual. 

2. Gas 

line 

MUST 

include an easily accessible manual shutoff valve, drip leg, and pressure gauge port. 

3.  Gas pipe size 

MUST 

be in accordance with the Pipe Capacity Chart in this Manual (pages 12 and 13). 

4. Gas 

line 

MUST 

be tested for leaks under pressure. 

5. Gas 

line 

MUST 

be purged to remove any air in the system. 

6.  Gas line pressure 

MUST 

be checked and 

MUST NOT 

exceed the maximum pressure specified in the 

Burner Specifications on page 16. 

7. Burner orifice 

MUST 

correlate with the type of gas being supplied, as specified in the Burner Specifica-

tions on page 16

.

 

 

 

 

WARNING: 

Improper gas hookup will void the warranty and could result in a hazardous condition.

 

Содержание SRG-400







































Отзывы:

Нет отзывов