Figure 3
Insert Cam Locks (C) into
corresponding holes on Front Upper
Bar (7), Front Lower Bar (8), Back
Upper Bar (9), and Back Lower Bar
(10).
Insert Cam Bolts (A) and Wood
Dowels (B) into corresponding holes
on Left Side Panel (3) and Right Side
Panel (4).
Attach Left Side Panel (3), Right Side
Panel (4), and Cross Bars (11) to
Front Upper Bar (7), Front Lower Bar
(8), Back Upper Bar (9), and Back
Lower Bar (10) by inserting Wood
Dowels (B), Cam Bolts (A), and Bolts
(N) into corresponding holes until all
panels meet.
Tighten by rotating Cam Locks (C)
clockwise with Phillips screwdriver
(not included).
Figure 4
Insert Wood Dowels (B) into the
pre-drilled holes on the
pre-assembled unit from Figure 3.
Align and connect the assembled unit
with the Bottom Panel (5).
Use Bolts (D/P) to secure the panels
in place.
Tighten Bolts (D/P) with Phillips
screwdriver (not included).
C
C
A
A
9
7
8
11
10
B
B
B
B
C
B
A
4
3
C
B
B
B
A
B
B
B
B
B
B
4
3
5
