LYNDEN MEDIA FIREPLACE
Assembly Instructions
Figure 1
Unpack and lay parts on clean,
padded surface like carpet or
blanket. Check that you have all
parts indicated on the front page
Insert cam locks (C) into predrilled
holes on the two lower side panel (7)
& (8) and two lower divided panel
(9) & (10).
Screw cam bolt (A) into predrilled
holes on shelf panel (4).
Attach the two lower side panel (7) &
(8) and two lower divided panel (9) &
(10).to shelf panel (4) by inserting
wood dowel (B) & cam bolt (A) into
corresponding predrilled holes until
the two lower side panel (7) & (8) and
two lower divided panel (9) & (10)&
shelf panel (4) meet.
Secure by rotating cam lock (C)
clockwise with Phillips screwdriver.
Repeat the same way to attach the
bottom panel (11 ) on the assembled
unit.
Figure 2
Insert cam locks (C) into predrilled
holes on the middle side panel (2)
and small middle panel (3).
Screw cam bolt (A) into predrilled
holes on pre-assemble parts in figure
1. Attach the middle side panel (2)
and small middle panel (3) to
pre-assemble parts in figure 1 by
inserting wood dowel (B) & cam bolt
(A) into corresponding predrilled
holes until middle side panel (2) and
small middle panel (3) &
pre-assemble parts in figure 1 meet.
Secure by rotating cam lock (C)
clockwise with Phillips screwdriver.
B
C
