9
6.
AXES STAKE-OUT
This session is to introduce the stake-out of the point by entering
the offset to a baseline. There’re 2 options to define the baseline.
One is to define by station point and a known bearing angle
(0°00’00”), one is to define by two new points.
Press
F1
or
F2
to select.
6.1
Stake Out of One Side on the Axes
Step 1: Set the theodolite at Point A.
Step 2: Aim at the prism which is set at Point B and press
OSET
to
set it to 0°.