Galaxy G1
- 51 -
In the megnetic calibration interface, click ‘Begin calibrate’, then flip and rotate
the G1 according to the sketch map on the bottom of the screen ( you can also
draw ‘∞’after G1 is connected to the carbon fiber pole), until the calibration is
finished 100%.
Calibrating Calibrated
3
ˊ
ˊ
Tilt survey
After you finish the calibration, you can start tilt survey, this function can correct
the slant coordinates to the normal coordinates with 30° angle of inclination.
§3.4 The antenna height measuring
The antenna height is related to static operations and RTK operations, the
following is the introduction separately.
Antenna height is actually the vertical height of the phase center to ground
measurement point, measurement methods of antenna height in dynamic mode
includes rod height, vertical height and slant height;
