11
stove if handy. This cuts and seals the individual
strands resulting in an excellent frayless finish.
STEP 7:
After you’ve spliceded the rope to the chain, tie
both ends of spliced rope to prevent the rope from
loosening.
V OPERATING
1.
During operating, if the circuit breaker bounces it means the
motor is overloaded. Press the button to reset.
2.
For free fall model only
: when releasing anchor, press
switch “DOWN”
once
(clutch will stay at open) to free fall
the anchor to the sea bed, until the current has drifted the
boat to a desired location and the anchor has cast firmly in
the sea bed, press the switch “UP” once to engage the
clutch.
You can set the rotating “free fall”
switch(in the right hand side of windlass)
by a flat screw driver to be a “on” free fall
mode or “off” Power Out mode.
Note: It is normal for the free fall switch can be rotated 360
degree
★
Do not use free fall function when using all chain
★
3.
Pay out the rope and chain approximate 2~3 times the
water’s depth for a firm casting while being anchored.
