South bend SB1493, Руководство пользователя

Страница: 16 / 32

-14-
For Machines Mfd Since 1/21
South Bend Tools
Model SB1493
P R E P A R A T I O N
Power Connection
Electrocution or fire
may occur if machine is
ungrounded, incorrectly
connected to power, or
connected to an undersized
circuit. Use a qualified
electrician to ensure a safe
power connection.
Once your machine is set up and assembled as
previously described in this manual, it is ready to
be connected to the power source
Note About Extension Cords: Using an
incorrectly sized extension cord may decrease the
life of electrical components on your machine
220V Conversion for SB1493
The Model SB1493 is prewired to operate on
110V power, but it can be converted for 220V
operation 220V conversion consists of installing
the correct plug Wiring diagrams are provided
in the back of this manual showing the Model
SB1493 wired for both 110V and 220V Refer to
these diagrams on Page 25 when following this
procedure
Test Run
After all preparation steps have been completed,
the machine and its safety features must be
tested to ensure correct operation If you discover
a problem with the operation of the machine or
its safety components, do not operate it further
until you have resolved the problem
Note: Refer to Troubleshooting on Page 23 for
solutions to common problems that may occur.
If you need additional help, contact our Tech
Support at (360) 734-1540.
The test run consists of verifying the following:
• Motor powers up and runs correctly
• Switch disabling key disables switch
properly
Items Needed Qty
Wire Cutter/Stripper 1
NEMA 6-15 Plug 1
Electrical Tape As Needed
To convert Model SB1493 to operate on
220V:
1. DISCONNECT MACHINE FROM POWER!
2. Cut off existing 5-15 plug
3. Install 6-15 plug on power cord according to
plug manufacturer's instructions
If plug manufacturer's instructions are not
available, NEMA standard 6-15 plug wiring
is provided on Page 25
Serious injury or death can result from using
this machine BEFORE understanding its
controls and related safety information. DO
NOT operate, or allow others to operate,
machine until the information is understood.
DO NOT start machine until all preceding
setup instructions have been performed.
Operating an improperly set up machine may
result in malfunction or unexpected results
that can lead to serious injury, death, or
machine/property damage.