manualshive.com logo in svg

South bend SB1092, Руководство пользователя


Поделиться
Скачать
background image

-12-

For Machines Mfd. Since 9/20

South Bend Tools

Model SB1092 & SB1094

P R E P A R A T I O N

This machine is equipped with a power cord 

that has an equipment-grounding wire and a 

grounding plug (similar to the figure below). 

The plug must only be inserted into a matching 

receptacle (outlet) that is properly installed and 

grounded in accordance with all local codes and 

ordinances.

The plug specified under “Circuit Requirements” 

on the previous page has a grounding prong that 

must be attached to the equipment-grounding 

wire on the included power cord. The plug must 

only be inserted into a matching receptacle (see 

following figure) that is properly installed and 

grounded in accordance with all local codes and 

ordinances.

Grounding Prong

Current Carrying Prongs

6-15 PLUG

GROUNDED

6-15 RECEPTACLE

Figure 3. NEMA 6-15 plug and receptacle.

Extension Cords

SB1092 .............................. 14 AWG, 50 ft or less

SB1094 ................................ 6 AWG, 50 ft or less

We do not recommend using an extension cord 

with this machine. If you must use one, only 

use it if absolutely necessary and only on a 

temporary basis.

Extension cords cause voltage drop, which may 

damage electrical components and shorten motor 

life. Voltage drop increases as the extension cord 

size gets longer and the gauge size gets smaller 

(higher gauge numbers indicate smaller sizes).

Any extension cord used with this machine 

must contain a ground wire, match the required 

plug and receptacle listed in the Circuit 

Requirements for the applicable voltage, and 

meet the following requirements:

This machine is prewired to operate on a power 

supply circuit that has a verified ground and 

meets the following requirements:

Nominal Voltage ......................................... 220V

Cycle .............................................................60 Hz

Phase ..............................................Single-Phase

Circuit Rating....................................... 50 Amps

Plug/Receptacle ..............(not included) L6-30

No adapter should be used with plug. If 

plug does not fit available receptacle, or if 

machine must be reconnected for use on a 

different type of circuit, reconnection must 

be performed by an electrician or qualified 

service personnel, and it must comply with all 

local codes and ordinances.

SB1092 Circuit Information

SB1094 Circuit Information

This machine is prewired to operate on a power 

supply circuit that has a verified ground and 

meets the following requirements:

Nominal Voltage ......................................... 220V

Cycle .............................................................60 Hz

Phase ..............................................Single-Phase

Circuit Rating....................................... 15 Amps

Plug/Receptacle (included) ...........NEMA 6-15

Grounding Prong

is Hooked

Current Carrying Prongs

GROUNDED

L6-30 LOCKING 

RECEPTACLE

L6-30

LOCKING

PLUG

Figure 4. NEMA L6-30 plug and receptacle.

Содержание SB1092

























































Отзывы:

Нет отзывов

Похожие инструкции для SB1092

Бренды по названию

Популярные бренды

Загрузить еще бренды