-2-
For Models Mfd. Since 04/20
Model SB1090
I N S T R U C T I O N S
This downdraft table and its
components are very heavy.
Get lifting help to move
heavy items.
Figure 3. Attaching foot pad to lower support leg.
Figure 6. Dust hose connected to dust port.
x1
Figure 4. Attaching lower support leg to upper leg.
x4
Figure 5. Attaching leg assembly to table.
x4
The procedure that follows describes the general
steps required for assembly.
Assembly
To assemble the downdraft table:
1.
Place a piece of cardboard or other protective
material on a flat, level, hard floor, then
place table face-down on it.
2.
Attach each foot pad to each lower support
leg using (1)
1
⁄
2
"-13 hex nut (see Figure 3).
3.
Attach each lower support leg to each upper
support leg using (4)
5
⁄
16
"-18 x
1
⁄
2
" flange bolts
(see Figure 4).
4.
Attach each support leg assembly to each
corner of table using (4)
5
⁄
16
"-18 x
1
⁄
2
" flange
bolts (see Figure 5).
5.
Stand table up, and place in desired position.
6.
Place suction boards in table and press
grommets in holes, as desired.
7.
Connect downdraft table dust port to dust
collection system with a 4" dust hose and
clamp (see Figure 6).
Needed for Setup
Description Qty
•
Additional Person for Lifting.........................1
•
Safety Glasses (for each person) ...................1
•
Adjustable Wrench .........................................1
•
Dust Collection Hose 4" .................................1
•
Hose Clamp 4" ................................................1
