South Bend Tools SB1125, Руководство пользователя

Страница: 34 / 56

MAINTENANCE
-32-
For Machines Mfd. Since 11/21
South Bend Tools
Model SB1125
M A I N T E N A N C E
Maintenance Schedule
For optimum performance from this machine,
this maintenance schedule must be strictly
followed.
Ongoing
To minimize your risk of injury and maintain
proper machine operation, shut down the
machine immediately if you ever observe any
of the items below, and fix the problem before
continuing operations:
• Loose mounting bolts.
• Worn switches/buttons/dial.
• Worn or damaged wires.
• Damaged V-belt.
• Any other unsafe condition.
Weekly
• Lubricate quill and column surfaces
(Page 33).
• Lubricate ball oilers (Page 34).
Monthly
• Check for V-belt tension, damage, or wear
(Page 35).
• Clean/vacuum dust buildup off motor.
• Lubricate quill and column racks (Page 34).
Always disconnect
machine from power before
performing maintenance or
serious personal injury may
result.
!
Cleaning & Protecting
Cleaning the Model SB1125 is relatively easy.
Vacuum excess metal or wood chips and wipe off
remaining dust with a dry cloth. If any resin has
built up, use a resin dissolving cleaner to remove
it.
Protect the unpainted cast-iron table and base
by wiping it clean after every use—this ensures
moisture from wood dust does not remain on bare
metal surfaces. Keep the table rust-free with
regular applications of products like SLIPIT® or
Boeshield® T-9 (see Figure 48 in Accessories).
Lubrication
Since all bearings on the Model SB1125 are
sealed and permanently lubricated, simply leave
them until they need to be replaced. DO NOT
lubricate them.
An essential part of lubrication if cleaning the
parts before lubricating them. This step is critical
because grime and chips build up on lubricated
components, which makes them hard to move.
Simply adding more lubricant will not result in
smooth moving parts.
Clean components before lubricating them with
recommended products like those in Figures
50–52 on Page 33.