ST2523 Series Operation Manual Ver1.2
56
7.1.9
TRACe Subsystem Commands
The :TRACe:TOTAL <value> command is used to set and return the total time of scanning.
For example: :TRACe:TOTAL 20
Query syntax: :TRACe:TOTAL?
Response: <value NR2>
The TRACe:INTERval <value> command is used to set and return the interval time between trace scanning.
For example: :TRACe:INTER 1.5
Response: <value NR2>
The :TRACe:AM<max value>, <min value> command is used to set the A Max value and the A Min value in
trace scanning setting.
For example: :TRACe:AM 3.1600E+03,2.0000E+02
Query syntax: :TRACe:AM?
Response: <max value NR3>, <min value NR3>
The :TRACe:BM<max value>, <min value> is used to set and return the BMax value and the BMin value in the
trace scanning setting.
