ST2515 Operation Manual
30
Touch this key, and the cursor under the time will move right.
4.2
<File Manage>
ST2515 series can save parameters that are set by user to the internal non-volatile memory in
the .STA file format. User can load the file to use these parameters instead of resetting.
This section will introduce the information about the function of Save/Recall.
Notation Explanation:
E: Abbreviation of External, representing external memory, like U disk.
I: Abbreviation of Internal, representing internal memory, like internal Flash of ST2515.
4.2.1
Introduction to Save/Recall
By the function of save/recall, user can save measurement results and configuration information
to ST2515 internal Flash or external U disk; meanwhile user can recall data from ST2515 internal
Flash or external U disk.
Introduction to Methods and Applications of Save
The table below shows the applicable save methods and applications:
Table 4-1 Methods and Applications of Save
save method
recall
application
type
file format
configuration
save
(internal Flash)
*.STA
Yes
Save the current configuration to
internal Flash.
configuration
save
(external U disk)
*.STA
Yes
Save the current configuration to a U
disk.
data save (external U
disk)
*.CSV
No
Save measurement results to a U
disk.
screen save (external
U disk)
*.gif
No
Save the screen information to a U
disk.
4.2.2
Structure of File Folder/File in a U Disk
Before saving data to a U disk, you are recommended to save it into a file and folder that have existed
in the memory as shown in table 4-2. If you want to save the configuration file into a file folder in PC,
you should enter into the folder on the instrument and then take relative file operations.
Table 4-2 Folder in U disk
Folder
Maximum Amount of File
Description
CSV
40
Including measurement result, like *.CSV file.
STA
40
Including configuration data, like *.STA file.
IMAGE
40
Including screen information, like *.gif file.
