7
5. Sub-frame parameter display, when the slave is not powered or connected or not started up, the zone
is blank; when it is powered and connected, and user starts it up, the zone is lighted, also the value of
output current is displayed. Generally, the current is distributed automatically, if the slave is assigned as
one of the output drivers, then it displays 20A, if not, it is 0A.
6. Virtual switch, click the zone to switch on and off,
if sky blue “I” is displayed, it means user has set the
slave as active, and when it is connected and powered, the display is as No. 5 above and LED indication
is as No 7 zone, then it will be included in the driver distribution
; if gray “II” is displayed, it means the user
has deactivated this slave and it is not available for current distribution.
7. Virtual display LED displays the status of power supply and running state. The bigger LED indicates
the STATE, the smaller LED indicates the connection and POWER status; if the slave is not connected
or powered, then all LEDs are black; if the slave is connected and powered, but not activated by the user,
then only POWER is lighted; if there is no problem, user can use it as one of the distributed drivers; if all
is finished, then the display is like No.5. and the STATE LED is lighted; if this slave is not distributed or
system is not in output status, the LED is red; if the slave outputs current, the LED is green.
8. Real time clock display (RTC)
9. The zone display real time message; currently only 2 messages are supported to display now, if user
needs, we can add more.
