4
1. Position your completed mantel close to its final location. Make sure you can access the back of the mantel as
your electric fireplace insert will be install from the back.
2. Place a piece of cardboard or protective sheet on the floor in order to avoid scratching the decorative surface of
your mantel during assembly. Please DO NOT fully tighten the KD screws until all panels are assembled.
3. The fireplace insert can be installed after the mantel has been fully assembled.
WARNING:
Make sure the fireplace insert controls are in the OFF position and the unit is NOT plugged in.
CAUTION
- High temperature, risk of fire, keep electrical cords, drapery, furnishings, and other combustibles at
least 3 feet (0.9 m) from the front of the heater and away from the side and rear.
To reduce the risk of fire, do not store or use gasoline or other flammable vapors and liquids in the vicinity of the
heater.
INSTALLATION INSTRUCTION
INSTALLATION
Rear view of fireplace
ELECTRIC
FIREPLACE
INSERT