Source Audio Soundblox 2 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 28

Source Audio Soundblox 2 Скачать руководство пользователя страница 24

24 |

External Control

USE WITH HOT HAND

All Soundblox pedals are compatible with our Hot Hand accessories. Hot
Hand units consist of a ring-mounted accelerometer that detects motion
and controls effect parameters. To enable Hot Hand functionality, connect
the Hot Hand receiver or base station to the MULTI-FUNCTION IN and
select HH mode with the CONTROL INPUT button. The pedal will now
accept input signals from Hot Hand and use them to control standard
modulation or the assigned parameter.

The Orbital Modulator can also be calibrated to change the midpoint of
the Hot Hand control range. To do this, follow the calibration procedure
below. Note that calibration is only used for Hot Hand mode and
calibration is NOT required before use.

To perform a calibration:

1. Select a preset by pressing a footswitch.
2. Enable Hot Hand control by selecting HH mode with the CONTROL

INPUT button.

3. Press and hold the CONTROL INPUT button until the HH red LED

begins to blink slowly (note: this is the same as the control assign
procedure).

4. Put the Hot Hand sensor into the desired calibration position.
5. Press the footswitch for the currently selected preset.
6. The HH LED will blink when the calibration is complete.

If you have trouble with calibration and need to get back to the default
setting, place the sensor on a flat, level surface with the blue LED facing
down and run the calibration procedure again.

«
...
22
23
24
25
26
...
»

Содержание Soundblox 2





























Отзывы:

Нет отзывов