SA241
Lunar Phaser User’s Guide
18
Low Cut Filter
The Lunar also includes a low cut filter (a.k.a. high pass filter) with an adjustable frequency. This filter
is very useful for cutting out low frequencies that do not contribute to the sound of the instrument,
as well as subsonic frequencies which cannot be heard at all. Bass players often use low cut filters set
very low (around 10 Hz to 30 Hz) to reduce speaker excursion and improve the clarity of the bass.
Guitarists often use low cut filters set somewhat higher (around 80 Hz) in order to give the bass
player additional room in the low end of the mix.
The Parametric EQ and the Low Cut filter are configurable using the Neuro Hub or USB Editor
software. By default, the parametric EQ is disabled (flat), and the Low Cut filter is set to 10 Hz.
External Control
The Control Input port opens up a wide array of external control options, allowing for direct control
over many of the Lunar’s built-in parameters. It can be used as an expression input or as a data port
for the Neuro Hub.
Expression Control
The Lunar’s effects parameters can be controlled directly by an expression pedal or Hot Hand
connected to the Control Input port.
Expression Pedal Input
The Dual Expression Pedal or Reflex Universal Expression Pedal, both from Source Audio, can be
directly connected to the Control Input using a 3.5 mm, TRRS cable.
50
100
200 300
500
1.0k
2.0k 3.0k
5.0k
10.0k
20.0k
-6
0
+6
Configurable Low Cut Filter