13
TG400/TG800 series voip gateway internet setting
1.
Time zone setting
2.
LAN IP, subnet mask IP setting (please keep default setting if not necessary to change the
IP))
3.
WAN internet setting
WAN connection type, please choose your networking type
Static IP (fixed IP, IP information provided by ISP)
DHCP Client (distributing IP automatically)
PPPoE (account / password provided by ISP)
5. Click “end” and finish the internet setting, then, go to “VOIP Setup” to configure the SIP
account.
6. Connect TG400/TG800 series voip gateway to your internet environment
(Connect RJ45 cable to WAN port of TG400/TG800 series voip gateway).
7. The device will set up voip information automatically if devices setting finished
8. The TG400/TG800 series voip gateway LED light showed green light on: "REG" port after 2
sec, which means the device registered automatically and successfully
9. Start to call voip call
Notice: If REG is red light, it means the wrong account registration or not connected to internet.
If there is no sign on REG light, it means the account doesn’t open yet, please contact your
supplier.
