manualshive.com logo in svg

SoundTraxx TSU-2200, Руководство пользователя

Поделиться
Скачать
SoundTraxx TSU-2200 Скачать руководство пользователя страница 9

All Aboard!

 

 

Tsunami2 Electric User’s Guide 

 

9 

Automatic Sound Effects 

Tsunami2 plays a variety sound effects automatically. Automatic sound effects respond 
prototypically to aspects of operation, such as certain functions, speed settings, and motor load 
changes.  
 

Traction Motors 

With the pantograph extended, the whine of the tractions motors is automatically adjusted by 
auto-notching and Dynamic Digital Exhaust as you operate. Refer to “Configuring the Decoder,” 
“Configuring Sound Effects,” and “Configuring Dynamic Digital Exhaust” to modify automatic 
traction motor sound effects. 
 

Contactor Camshaft 

The contactor camshaft will change its position at fixed speed points when the pantograph is 
extended. Retract the pantograph to mute the contactor camshaft. 
 

Generator 

The electrical generator will produces energy when the pantograph is extended. Retract the 
pantograph to mute the generator. 
 

Air Compressor 

The air compressor maintains air pressure during operation. It will cycle to charge the train line 
when F12 is turned on and off. It will also operate for a longer period of time when the coupler 
function is turn on and every third time the independent brake is applied. 
 

Poppet Valve 

The “pop!” of the poppet valve is active in the background when the pantograph is extended. 
Retract the pantograph to mute the poppet valve. Refer to “Configuring Sound Effects” to adjust 
the poppet valve release rate. 
 

Blower Fans 

The blower fans will engage and play continuously when the pantograph is extended. Retract 
the pantograph to mute the blower fans. 
 

Clickety-Clack 

The “clickety-clack” of the locomotive running across rail joints is synchronized in proportion to 
locomotive speed. To adjust the clickety-clack sound effect, refer to “Configuring Sound 
Effects.” 
 

Electrical Arcing 

The occasional “Zap!” of the pantograph loosing contact with the overheard wire can be heard 
when operating the locomotive above speed step 10 in 128 speed step mode. The pantograph 
must be extended to hear this sound effect. 
 

Motorman Omura 

Each time the engine is brought to a stop, Motorman Omura may attend to a randomly selected 
task (or tasks), including tightening nuts and bolts, checking the frame and more. 
 
 
 

 

Содержание TSU-2200












































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды