In the section
Audio Performanc
e, set
Number of Channels
to
16
(recommended).
In the
Monitoring
section, select
Global Disable
(recommended). If you want
to monitor signals in realtime and adding VST plugin effects at the same time,
select
Tape Type
instead.
In the upper right corner under
ASIO Device
select
ADSP24 ASI
O. By
clicking on
ASIO Control Pane
l, you can also change the
samples per buffer
value.
Below that you can choose the
Sample Rat
e.
If you want to use the Audio DSP24 s realtime monitoring functions (without
adding effects to the monitor signal), select
ASIO Direct Monitoring
To define which input and outputs to use in Cubase VST, first go to
Audio>Input
s.
A window will appear that allows you to activate or deactivate each input (stereo).
You can assign these inputs to the channels in the
VST Channel Mixer
then (via
Audio>Monitor
s). For the outputs, you need to open
Audio>Maste
r. In this
window you can deactivate a stereo bus for each stereo output. These busses can be
used internally in Cubase VST to route signals to the outputs. You can find more
information about this in the Cubase VST documentation. Also, the latest updates
for Cubase VST can be downloaded from http://www.steinberg.de.
Setting up Emagic Logic Audio Platinum 4.5
The powerful Audio-/MIDI-Sequencer Logic Audio Platinum 4.5 (and higher)
from Emagic also uses ASIO drivers. Follow these steps to setup the application for
the Audio DSP24.
call
File>Hardware settings
in External Links..
- 30 -
