6
Wiring Connections
Make sure you have good chassis ground. A good ground connection will eliminate most
electrical noise problems. A good chassis ground requires a tight connection to the vehicle’s
metal chassis. The area around the ground connection should be clean, bare metal without rust,
paint, plastic, dust, or dirt for a good electrical connection.
Caution:
Do not interchange
the connection of the wiring!!!
For some car models you may
need to modify wiring of the
supplied power cord. Contact
your authorized car dealer
before installing this unit.
Using the ISO Connector
1. If your car is equipped with
the ISO connector, then
connect the ISO connectors as
illustrated.
2. For connections without the
ISO connectors, check the
wiring in the vehicle carefully
before connecting, incorrect
connection may cause serious
damage to this unit.
3. Cut the connector; connect
the colored leads of the power
cord to the car battery as
shown in the color code table
below for speaker and power
cable connections.
Function
Ground--Black
Front Right(-)---Grey/Black Stripe
Battery 12V (+)---Yellow
Reverse 12V (+)--Pink
Auto Antenna---Blue
Power 12V(+)--Red
Steering Wheel Control---Blue/Black
Front Left(+)---White
Parking (GND)---Brown
Front Left(-)---White/Black Stripe
Rear Right(+)---Purple
Rear Left(+)---Green
Rear Right(-)---Purple/Black Stripe
Rear Left(-)---Green/Black Stripe
Front Right(+)---Grey
