12
24. / seek + buttons
In DVD mode, Press button to skip to the next track. Press and hold button for two
seconds to activate fast forward (FF) search in a track.
In RADIO mode, press button to start searching automatic, press and hold for two seconds to
start manual searching. button Frequency up.
25. VOL- button
Press to decrease volume level.
26. AUDIO/GOTO button
In DVD mode press it to select the audio language.
In VCD mode, press it to select the sound track in the sequence of MONO L =>MONO R
=>STEREO.
Go to: in DVD mode
，
press and hold for 2 seconds to show TIME SEARCH menu, select
number and confirm to go to certain position directly. When press
button to enter
TITLE/CHAPTER selection mode, select number and confirm to go to certain TITLE or
CHAPTER position directly.
27. DUAL button
•
Access GENERAL setup in the SETTINGS menu and press the icon for DUAL mode
and select ON.
Activating Dual Zone Mode
•
Insert a DVD or begin playing a movie from SD card or USB.
•
Press and hold the front panel POWER button, or the DUAL button on the remote
control, until C-DUAL appears on the screen.
Controlling the Front Zone (C-DUAL)
•
Press the ARROW icon in the top right corner of the screen to return to the main menu.
Select the mode you wish to use in the front zone.
•
The units screen will change to the selected mode. The DVD or SD/USB movie will
continue to play only on the VIDEO OUT and DUAL OUT audio outputs, while the
selected mode audio is played through the front and rear LINE outputs. All front panel
and remote controls will affect only the selected mode activated for the front zone.
•
Press and hold the front panel POWER button, or the DUAL button on the remote
control again, until D-DUAL appears on the screen.
Controlling the Rear Zone (D-DUAL)
•
All front panel and remote control functions for DVD, USB, or SD, including volume, will
control only the media playing for the rear zone.
Press and hold the front panel POWER button, or DUAL button on the remote control until D-
DUAL disappears to return to normal unit operation. Press and hold the front panel POWER
button or DUAL button on the remote control again to reactivate Dual Zone Mode.
28. OPEN/TILT button:
Short press it open or closed the monitor; long press it to adjust the tilt angle of monitor.
