3
FEATURES
SPL 65 Midrange / Woofer
The SPL 65 is an excellent performer with a combination of high
sensitivity, solid bass and smooth response throughout the audible
range.
•
Lightweight Cone designed for good rigidity and high sensitivity
•
2 Ohm Voice Coil for increased voltage sensitivity and higher output
Aluminum Dome Neodymium Tweeter
The SPL 65's coaxially mounted tweeter is a high performance 1”
Neodymium tweeter designed to deliver outstanding high frequency
reproduction.
•
Black Aluminum 1" dome for improved power handling and
linear response
•
Ferrofluid-immersed Voice Coil enhances heat dissipation
•
Vented Aluminum Voice Coil Former for superb heat dissipation
and high power handling
Passive Crossover Network
•
The crossover consists of high quality 2 pole design for improved
power handling, lower distortion and better imaging
•
Acoustic Summation design combines the crossover with the
speaker's natural roll-off for a steeper slope and increased power
•
Dynamic tweeter protection allows for improved power handling
and continuous output
2 Ohm Nominal System Impedance
The 2 Ohm impedance design of the SPL 65 system provides an overall
3 dB increase in output compared to a 4 Ohm design.
•
Effectively a doubling of Sound Pressure Level -- with the same
voltage input
•
More stable, phase coherent load than two 4 Ohm speakers
operating in parallel providing an easier load for an amplifier
65.pub
page 3
Friday, September 10, 1999 21:02
