soundsation WF-DA100, Руководство пользователя

Страница: 5 / 16

5
ENGLISH
WF-DA100 User’s manual
1) Antenna Cable Connector (BNC)
Install with a 15dB-booster. According to the actual conditions, it need to have 5-20m
antenna cable to connect the receivers of antenna dividers which offer 8V-12V DC bias
output power
2) ADAPTER FOR SETUP ON TRIPOD
3) Power LED Indicator
The LED lights with the 8V-12V DC bias power input from receivers and the booster will
be started at the same time.
4) Holding Knob
Holding antenna’s direction. Generally, loose the screw to adjust antenna vertical direc-
tion and tighten the button to hold the direction when it fixed.
4. SETUP INSTRUCTION
1. Place the adapter
2
on the tripod and then
screw it in completely.
2. The antenna connector 1 , should be connect
5-20m antenna cable (BNC) to ACT-Series re-
ceivers or antenna dividers. While switching on
the receiver or antenna divider, check the power
indicator. If the indicator does not light up, it
means the built-in booster is failed.
3. Adjust antenna’s directional angle to proper
position for best performance result as shown
below.
Avoid placing the antenna incorrectly as shown below