soundsation WF-D190, Руководство пользователя

Страница: 20 / 48

10.2. WF-RACK KIT1 Assembling
1. Remove the two plastic parts on each of the two sides of the receiver.
2. Place the A adapter so that the two lateral holes match those on the receiver side.
3. Fasten the adapter using two screws as shown in the following picture.
4. Repeat steps 1 to 3 of this section on the other side of the receiver.
5. Unscrew the two rear antennas and insert extension cables supplied with the kit.
Then attach the other end to the panel in order to place the antennas outside the
rack. The same operation must be performed for both antennas.
1
2
4
3
5
10.3. WF-RACK KIT2
The kit includes:
A
B C D
E
A. 1x 19” rack panel
B. 2x Lateral brackets
C. 4x Receiver’s coupling brackets
D. 4x Extension cables for Antenna
E. 12x Screws to fasten the two receiver each other and then to the rack adapters
NOTE: The kit doesn’t include screws to fasten the whole block (receiver and
adapters) to the 19” rack chassis.
20
ENGLISH
WF-D190 MKII User manual