soundsation THESIS 1240RZ, Руководство пользователя, Страница: 11 / 64

11
ENGLISH
THESIS 740RZ / 1240RZ User manual
doubts concerning the safety of a possible installation, do not install the
fixture!
CAUTION: Use two appropriate clamps to rig the fixture on the truss. Follow
the instructions mentioned at the bottom of the base. Make sure that the
device is fixed properly! Ensure that the structure (truss) to which you are
attaching the fixtures is secure.
DANGER OF FIRE! When installing the device, make sure there is no highly
inflammable material (decoration articles, etc.) within a distance of minimum
0.5 meter.
The moving head can be placed directly on the floor or rigged in any orientation on a
truss, without altering its operation characteristics. Please refer to the picture below and
strictly follow the instructions.
5
1
2
3
5
5
4
90°
2
6
f
Use clamps suitable for the section of the truss on which you want to fix the mov -
ing head.
f
Insert the screw in the central hole of the bracket n.2, and tighten the nut supplied
with the clamp (and any washers always supplied with the clamp).
f
Place the plugs with wings n.3 in the direction of the holes n.5 placed under the
base of the moving head. Screw them clockwise for about 90°, until you hear a click
that indicates the achievement of the correct and safe position.
f
Hook the moving head to the truss through the two clamps now perfectly fixed to
the base, and screw the wing-screw n.4 so as to tighten the moving head and avoid
as much as possible vibrations during the use of the fixture.
f
For overhead use, always install a safety rope that can hold at least 10 times the
weight of the fixture. Hook the safety cable to the hole n.6 located under the base
of the moving head.