Avoid explode:
Don’t add tinder liquid such as oil, gas, perfume and etc. in smoke machine
Pay more attention to all notices sign and operation instructions on all
machines
Please use the high quality smoke liquid recommended by distributors. Bad
quality smoke liquid may get blast or spray oil
Often check whether there has enough smoke liquid
Get out all smoke liquid before transport or post
Don’t eat smoke liquid otherwise to see the doctor immediately. Use clean
water to wash skin and eyes once smoke liquid touches them.
Remove package and check:
1. Open carton to check whether all necessary spare parts include accord the
specification list.
Please contact distributor if there are something missed.
2. Check the appearance of machine and power line to see whether they have
some obvious damage.
Please contact distributor once you find something and stop to use smoke
machine.
Installation:
1. Take away all pack material especially the spray mouth.
2. Set in the horizontal direction and open the cover of liquid can.
3. Add high quality smoke liquid in the machine and screw the cover of liquid
can. Bad quality Smoke liquid will damage smoke machine.
4. Plug the plug of remote console in the socket of the back of machine.
Operation:
1. Connect the power line to the power socket with earth line. Turn the switch
at “On” and the machine heat. The red LED of line console will light once the
machine finish heat.
2. Press red key, the machine will spray Smoke (Press it as long as you need).
3. The red LED of remote console light or not means the machine can spray
smoke or heat itself.
4. Can set the machine at a high place (with hanger) or on the ground. Do not
spray Smoke to people directly and the lean angle should less than 15.
