soundsation Scenemaker 1216 Pro USB, Руководство пользователя

Страница: 25 / 56

2. Keep pressed
USB DISK
and
SCANNER
(
1 - 8
) and then POWER ON the console.
If press
SCANNER 1
, the 1.TXT data will be uploaded, and so forth.
3. If green
WORK
led flash, it means all data have been uploaded to console properly
and console will back to normal working status. In the case of
ERROR
green led
ON, it means that there is a USB error. “ERROR” message flashes on LCD display.
4. Uploading procedure failed.
NOTE: Repeat above Step 1~3 to upload different TXT data to console. The
latest uploaded TXT data will be final data on console.
13.3. Reset to Factory Default Settings
1. POWER OFF console
2. Keep pressed
MUSIC/BANK COPY
and
AUTO/DEL
, then POWER ON the Con-
sole to reset it to factory default settings (all LEDs will flash on display).
NOTE: All programs and setting will be erased after this operation.
14. APPENDIX
14.1. DMX Introduction
There are 512 channels in a DMX-512 connection. Channels may be assigned in any
manner. A fixture capable of receiving DMX 512 will require one or a number of se-
quential channels. The user must assign a starting address on the fixture that indicates
the first channel reserved in the controller. There are many different types of DMX con-
trollable fixtures and they all may vary in the total number of channels required.
Choosing a start address should be planned in advance. Channels should never overlap.
If they do, this will result in erratic operation of the fixtures whose starting address is
set incorrectly. You can however, control multiple fixtures of the same type using the
same starting address as long as the intended result is that of unison movement or
operation. In other words, the fixtures will be slaved together and all respond exactly
the same.
14.2. Building a Serial DMX Chain
DMX fixtures are designed to receive data through a serial Daisy Chain. A Daisy Chain
connection is where the DATA OUT of one fixture connects to the DATA IN of the next
fixture. The order in which the fixtures are connected is not important and has no effect
on how a controller communicates to each fixture. Use an order that provides for the
easiest and most direct cabling.
25
ENGLISH
SCENEMAKER 1216 PRO USB User manual