soundsation DCX NET Series, Руководство пользователя

Страница: 11 / 47

11
ENGLISH
DCX NET series User manual
distance or for applications with multiple units. It is also possible to connect your DCX
Series processor directly to the PC via an RS-485/USB interface (optional) and control
the unit via the supplied software. For more information on purchasing this interface,
contact your local SOUNDSATION dealer.
4)^AUDIO OUTPUTS
5)^AUDIO INPUTS
6)^ETHERNET SOCKET
5.1. AUDIO CONNECTIONS
You will need XLR cables for the connections to the amplifier. See the pictures below
that show the internal wiring of these cables. Be sure to use only high quality cables.
You can, of course, also connect unbalanced equipment to balanced inputs. Use either
mono and stereo jack, making sure ring and collar are connected together (or pins 1 &
3 in the case of XLR connectors).
Balanced use of XLR connectors
1= Ground/Shield
2= Hot (+)
3= Cold (-)
INPUT OUTPUT
In case of unbalanced use Pins 1 and 3 will be jumped
6. PARAMETERS OF INPUT CHANNELS
As explained previously in “4.2. INPUT SELECT SECTION” on page 7, by pressing
and holding the MUTE button, the parameter list for INPUT channels is accessed (A, B,
C, D). By using the BACK or NEXT buttons you can reach all the parameters available for
the input channels.
1)^GAIN
For each Input Channel it is possible the GAIN regulation using the left encoder in the
control panel section (“4.3. CONTROL PANEL SECTION” on page 8). The range of
GAIN parameter is -40dB ÷ +12dB.
In A
+ 0.3dB
Gain
2)^DELAY
Once the DELAY parameter has been selected, using the left encoder you can make