5
external phantom power supply is needed.
After having placed the microphone, start adjusting sound on
your mixer by setting to ‘OFF’ or ‘FLAT’ the relative channel EQ
first. Then use EQ, reverb, echo or any signal processing to cre
-
ate special effects, according to your creative idea.
5. STORAGE
After use, wipe the CM-1000 with a clean cloth. In any case,
please be noticed that condenser capsule is extremely sensitive
to moisture. So, if the microphone is being used regularly, we
strongly suggest you to cover it with a protective cloth.
6. CM-1000 Technical Specification
Transducer Principle:
Condenser
Directivity Characteristic Cardiod
Frequency Response:
20Hz – 20kHz
Sensitivity:
-38dB ± 3db
Load impedance
≥ 1000 Ohm
Output Impedance:
≤ 100 Ohm
Self-Noise:
25dB A
Max Input SPL:
135dB (at 1kHz ≤1% T.H.D.)
Phantom Power:
9V ÷ 52V
Mic. Size ( Ø ; Length ):
20 mm ; 129 mm
Mic. Weight:
107 g
Packing Size (WDH)
166 x 105 x 61 mm
Packing Weight
192 g
Technical specifications and appearance subject to change without notice.
The information contained herein is correct at the time of printing
