SoundPeats Truebuds, Руководство пользователя, Страница: 8 / 53

En
glish
6
Charging
Charging the headset
Factory Reset
(Try the following steps if you fail building connection between two earbuds, or
between earphones and device)
1.Clear pairing record between the earbuds and all your devices.
2.Place back both earbuds into the charging case and ensure they’re in charging
status. Then long press the multifunction button of both earbuds for 10s until the
LED light of both earbuds flash white twice.
The earphones are partially charged at the factory. Please make sure they are fully
charged before first use.
1.Put the earphones into corresponding charging docks, make sure the charging
contactors are match.
2.The LED indicator will turn red when it starts charging.
3.The red LED indicator will turn off when the earphones are fully charged.
SOUNDPEATS Truebuds Bluetooth earphones are equipped with a lightweight
charging case which is not only a charging dock to charge the earphones, but also a
carrying case. With a built-in rechargeable battery, the charging case can provide up to
20 times full charge for the earphones (both left and right).