1.800.338.7337 / www.soundoffsignal.com
HANDHELD REMOTE
ENGCP15001
PROGRAMMING MANUAL
EVCS_HANDHELD_ENGCP15001 05.16
NOTICE:
Installers and users must comply with all applicable federal, state and local laws regarding use and installation of warning devices.
Improper use or installation may void warranty coverage. To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product, visit our website at
www.soundoffsignal.com/sales-support
. If you have questions regarding this product, contact
Technical Services
, Monday - Friday, 8 a.m. to 5 p.m. at
1.800338.7337
(press #4 to skip the
automated message). Questions or comments that do not require immediate attention may be emailed to
SUPERIOR CUSTOMER RELATIONSHIPS. SMARTLY DESIGNED LIGHTING & ELECTRONIC SOLUTIONS.
ALTERNATE HORN RING CONTROL
OPTION 1
OPTION 2
STANDBY
OEM HORN
OEM HORN
LEVEL 1
OEM HORN
OEM HORN
LEVEL 2
Air Horn or Wail Button
Tone while Pressed
*
Tap to Turn On Warning Tone, Tap
again to Change Warning Tone. Press
and Hold for Air Horn Tone
LEVEL 3
Tap to turn ON Warning
Tone, Tap again to
change Warning Tone.
Press and Hold for Air
Horn Tone
TONE SWITCH
OFF:
Air Horn Tone or
Wail Button Tone
while Pressed
*
TONE SWITCH
ON:
Tap to change
Warning Tone,
Press and Hold
for Air Horn Tone
Horn Ring Program:
1. Press and Hold Auxiliary Button #3 and #4 until ‘Ø’ LED
flashes.
1
. Alternate Horn Ring Control: Custom operation of vehicle
horn when pressed. Refer to figure left for details.
ON = Enabled
OFF = Disabled
Other Modes:
1. Press and Hold Auxiliary Button #1 and #5 until LEVEL #1 and
LEVEL #3 indicator LED flashes.
1
. Buzzer: Audible tone from control panel whenever operator
presses push-button or changes position of slide/rotary
switch.
ON = Enabled
OFF = Disabled
*
2
. Park Kill Latch: When Park Kill input is triggered, determines
how siren tone proceeds once park kill input is no longer
active.
ON = Tone remains disabled until operator
selects other tone.
OFF = Tone resumes once Park Kill input is
no longer active
*
Set in “Horn Ring Program”
3. Horn Ring Standby Tone
2.
Alternate Horn Ring Control Option:
(Alternate Horn Ring Control must be enabled).
Custom operation of vehicle horn when pressed.
Refer to figure left for details.
ON = Option 2
OFF = Option 1
2. When finished, momentarily depress Radio Rebroadcast (RR)
button to exit programming mode.
3
. Power Down: Determines whether siren will operate when
ignition input has no voltage
ON = Siren will operate w/o voltage on
ignition input
OFF = Siren is disabled when no voltage is
present on ignition input
4
. Auxiliary Input: Determines which siren tone will activate when
auxiliary input is activated.
ON = Air Horn tone
OFF = Tone which is programmed on Wail
push-button
MASTER
ON / OFF
(Siren Standby)
Control
LEDs
AUXILLARY
BUTTON #s
1 2 3
4 5 6
LEVEL Switches (1,2,3
with indicators)
HORN LED
MANUAL
LED
‘Ø’ LED
SIREN LED
RADIO
REBROADCAST
LED
2
3
