BOLT2 LED LIGHT
E1XS2SME5(xx)
E1XS2SME5xx 0219
Pg. 2
1.800.338.7337 / www.soundoffsignal.com
NOTICE:
Installers and users must comply with all applicable federal, state and local laws regarding use and installation of warning devices.
Improper use or installation may void warranty coverage.
To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product, visit our website at
www.soundoffsignal.com/tech-services/returns/
.
If you have questions regarding this product, contact
Technical Services
, Monday - Friday, 8 a.m. to 5 p.m. or after hours 5 p.m. to 8 p.m. ET at
1.800.338.7337
(press #4).
Questions or comments that do not require immediate attention may be emailed to
SUPERIOR CUSTOMER RELATIONSHIPS. SMARTLY DESIGNED LIGHTING & ELECTRONIC SOLUTIONS.
Flash Patterns
Pattern Name
ECE
Pattern
SAE
Pattern
CA 13
Pattern
F.P.M.
(Flashes /
Second
1. Single
X
X
2.08
2. Double
X
X
2.08
3. Quad 2
X
1.12
4. Quint
X
1.18
5. Power Pulse
X
3.03
6. Road Runner
X
X
1.89
7. Slow Runner
X
X
1.16
8. Steady ON
N/A
TECHNICAL SPECIFICATIONS
Voltage Range
10-30Vdc
Current Draw @ 12.8Vdc
1.1 Amps
Number of LEDs
Single Color: 9 LEDs
Dual Color: 18 LEDs (9x Color 1 & 9x Color 2)
Flash Patterns
8
Operating Temperature
-40C to +65C
Dimensions
(5.5” L x 1.6” H x 0.48” D)
140mm L x 41mm H x 12.2mm D
Mounts
Surface Mount
Certifications
ECE R65 Category X, Class 2 Amber, Blue, Red
SAE J595 Class 1, Red, Blue, Amber, White
CA Title 13 Table I, Class B, Red, Blue, Amber
ECE R10
Warranty
3 Year
OPERATING INSTRUCTIONS
Connect the Red / Yellow wire to switched (+) power, Black wire
to (-) Ground and all White wires from all lights together that
will be sync’d.
PATTERN RESET
Momentarily t
ouch the White wire to (+) power for ≥5sec.
PATTERN SELECT
With light powered, touch White wire to Red Power wire for 1
second.
LOW POWER DIMMING OR NIGHT MODE
Connect the Red / Yellow wire to (+) power then connect Green
wire to (+) power to put light into Dim or Low Power mode.
SIMULTANEOUS / ALTERNATING MODE SELECT
(When synchronizing more than one light)
Co
nnect Red wire to (+) power so light is flashing, then
Momentarily hold the White wire to (+) power for >2sec,
<4sec to toggle between Simultaneous and Alternating sync
modes.
Color 2 Flashing / Steady Mode Select
Connect Yellow wire
to (+) power so light is flashing or steady
ON, then Momentarily hold the White wire to (+) power for
>2sec, <4sec to toggle between Flashing and Steady Modes
for Color 2.
