SoundMax SM-CMD5001, Инструкция по эксплуатации

Страница: 16 / 71

16
System adjust
In this menu you can adjust a number of general system operation parameters. Touch an item on the
screen to get the option menu, and then select the needed option by touching it on the screen. Touch arrow
buttons at the right side of the screen to display the next or previous menu page.
Clock System: Set 12-hour or 24-hour clock display mode.
Key Beep: Select ON or OFF, the default setting is ON. It means when you press the buttons, they are
sounded.
Monitor Flex: not adjustable.
Rever Pola (Reverse Polarity): The signal is +12V when you back a car, please touch BATTERY on the
monitor; if the signal is 0 V, please touch GROUND.
Lamp Sel: In this menu you can adjust backlight of front panel buttons, press it and select ON or OFF,
the default setting is ON.
AMS Fullup: In this menu you can set the modes of AMS. When the setup is ON, the presettable
stations are full, new one’s are not allowed. When you select OFF, it will search continually.
Local Area: You can select EUROPE, USA or OIRT, to search the stations quickly in your current area.
Local: In this menu you can search local stations. When selected ON, the strong signal local stations
can be received; when selected OFF, week signal out-of-town stations may be received.
Goto Frequency: Selecting ON, you can use GOTO button on the RC to select a station’s frequency
directly in radio mode.
RT Scroll: You can select SLOW, NORMAL or FAST RDS scroll speed.
TA Volume: You can select LOW, NORMAL or HIGH TA volume.
Region: To set the AF searching region, the default setting is ON. You can also set it to OFF.
Adj Screen: After you touch this item, a green cross appears in the top left corner of the display and a
tip: “Please press the button”. Press the cross at place 1, then it will move to another corner, press it
again. Now it will move to the third position, press it, then the last position. After you pressed the
green cross four times, “Adjust successful” will appear. This procedure is useful when some malfunction
occur with the touch screen, and it needs adjustment.
Clock Adj: This option is to adjust the time. Use touchable LEFT/RIGHT arrows to select hours, minutes
or seconds. Use touchable UP/DOWN arrows to set the selected item.