SoundMax SM-CMD3007, Инструкция по эксплуатации, Страница: 17 / 64

17
Radio operations
Band selection
Press BND/RDM button on the RC or BND button on the panel to switch to the bands in the following order:
FM1 - FM2 - FM3 (OIRT) – MW (AM).
Manual/automatic tuning
Manual tuning: Press and hold PREVIOUS/NEXT buttons on the RC or panel to enter manual tuning
mode. MANUAL will be displayed. Press these buttons repeatedly to change the frequency upward or
downward step by step.
Automatic tuning: Press repeatedly PREVIOUS/NEXT buttons on the RC or panel to start automatic
seeking for an available radio station downward or upward. After being found the station will be played.
To stop seeking, press one of these buttons again.
Programming stations
There are 6 numbered preset buttons, under which you can store and recall stations for each band (18 FM,
6 AM). Select the needed station, then press and hold a preset button. The station will be saved in the
memory under the corresponding number. To recall a stored station, press the corresponding preset button.
Auto memory store/Preset scan
Auto store: Select a band, press and hold AS/PS button on the panel or P.SCN/RPT button on the RC to
enter auto store mode. The radio will automatically store 6 stations to the 6 preset memories of the current
band. To stop auto store, press the button again.
Note: During auto station preset, the unit will search and store stations with the strong signal first, and
then weaker signal stations until the memories are full.
Preset scan: Select a band, press AS/PS button on the panel or P.SCN/RPT button on the RC to scan all
preset stations in the memories of the current band. To stop preset scan, press the button again.