SoundMax SM-CCR3037, Инструкция по эксплуатации

Страница: 17 / 46

17
Radio operations
Band selection
Press repeatedly BAND button to select your desired radio band in radio mode: FM1, FM2, FM3, MW1 (AM1),
MW2 (AM2). Each band can store 6 preset stations, for a total of 30 preset memory stations.
Tuning
Press and hold PREVIOUS or NEXT button; the unit will automatically search a nearest station with a strongl
signal. To search next station, repeat this procedure. To stop the automatical search, press PREVIOUS or
NEXT button. Press PREVIOUS/NEXT buttons to search for a station manually step by step.
Automatic store/Scan
Automatic store: Press and hold AMS button, the receiver will automatically scan and save stations for the
current band.
Scan: Press AMS button once to scan the saved stations in each band.
Programming stations
There are 6 numbered preset buttons, under which you can store and recall stations for each band. Select the
needed station, then press and hold a preset button. The station will be saved in the memory under the
corresponding number. To recall a stored station, press the corresponding preset button.
Mono/Stereo control (in FM radio mode)
Press and hold SEL button; then press it repeatedly until the display shows STEREO (MONO). Press VOL+/VOL-
buttons on the RC or rotate VOL regulator on the panel to select between STEREO/MONO. STEREO means
stereo reception of the signal; MONO means mono reception mode. Improvement of reception of distant
stations can be done by selecting mono mode, which may cut down some reception noise.
Local radio station
Press and hold SEL button; then press it repeatedly until the display shows LOCAL (DX). Press VOL+/VOL-
buttons on the RC or rotate VOL regulator on the panel to select between LOCAL/DX. LOCAL means that only
local stations are received; DX means that both local and distant stations with weak and strong signal are
received.