URD480
/ English Instruction Manual
5
AUX-IN MODE
This unit provides an auxiliary audio signal input jack for connecting external audio devices.
Use an audio cable (not included) with one 3.5mm stereo plug on each end of the cable.
1.
Plug one end into the “AUX-IN” jack (19) on the main unit and the other end of the cable into
the Line-Out jack or headphone jack of your external audio device.
2.
Turn the unit on by pressing the “I / “ button (2) and choose the AUX mode by pressing the
“
FUNCTION
” button (8).
3. The volume level can now be controlled through the main unit. Operate all other functions on
the auxiliary device as usual.
•
If the Line Out jack of your external device is connected, then you only need to adjust the
volume control of this system. If the headphone jack of your external device is connected,
then you may need to adjust both the volume control of your external device and the volume
control of this system to find the most desirable volume setting.
ALARM
Setting the Alarm
1. Set the unit in standby-
mode and press the “ALARM” button (4) once.
2.
The display will show “Select Alarm (1) 2”. Press the “
/
” button (10) to select alarm
setting of alarm 1 or 2.. To confirm press the “ALARM” button (4) again.
3.
The display will show “Set Alarm (ON) OFF”. Press the “
/
” button (10) to select “ON”.
Press the “ALARM” button (4) again to confirm.
4. The hour digit of alarm time will flash. Press the
“
/
” button (10) to select the alarm time
hour. Press “ALARM” button (4).
5. The minute digit of alarm time will flash. Press the
“
/
” button (10) to select the alarm
time minute. Press the “ALARM” button (4).
6. Alarm type will be shown on display. Press the
“
/
” button (10) to select alarm mode by
Buzzer / CD / USB / DAB / FM. Press the “ALARM” button (4).
7. Volume level will be shown. Press the
“
/
” button (10) to adjust the wake up level.
Press “ALARM” button (4).
8.
The display will show “AL1” or “AL2” icon and keep in standby-mode
9.
To turn off the alarm press the “ALARM” button (4) once. Then select alarm 1 or 2 and press
the “ALARM” button (4) again. Then select OFF at “Set Alarm ON (OFF)” and press the
“ALARM” button (4) again. Then press the “ALARM” button (4) until the end of the alarm
setting. The AL will disappear on the display.
Snooze
Press the “
SNOOZE
” button (6) once to extend the alarm for 9 minutes every time and the AL
icon on the display will be flashing.
Setting Sleep-Timer
1.
Press the “
SLEEP
” button (5) to enable the sleep function.
2. Keep pressing the button to adjust the sleep timer in the sequence:
10 / 20 / 30 / … / 90 minutes.
3. The system will stop and automatically go into standby-mode after the selected time has
passed.
4. To cancel the Sleep-
Timer press the “
SLEEP
” button (5) until it reaches the “00” mode.
