SOUNDMASTER URD-800, Инструкция по эксплуатации

Страница: 3 / 6

3
1. CD COMPARTMEN
2. SNOOZE BUTTON
3. PROGRAM BUTTON
4. CD REPEAT/RANDOM BUTTON
5. CD STOP/CLOCK ADJ. BUTTON
6. CD SKIP UP BUTTON
7. CD PLAY/PAUSE BUTTON
8. AL. 2 SET BUTTON
9. AL. 1 SET BUTTON
10. POWER/AL. OFF BUTTON
11. CD SKIP DOWN BUTTON
12. CD DISPLAY BUTTON
13. SLEEP BUTTON
14. LED DISPLAY
15. SPEAKERS
16. VOLUME
CONTROL
17. DIMMER SWITCH
18. FUNCTION SWITCH
19. TUNING CONTROL
20. BAND SWITCH
21. PHONES JACK
22. FM ANTENNA WIRE
23. AC POWER CORD
24. BATTERY
COMPARTMENT
MAINS POWER
Plug the AC MAINS POWER PLUG into the standard household AC 230V 50Hz.
Warning:
Before insert the MAINS POWER PLUG into the household receptacle, please make
sure the AC VOLTAGE SELECTOR MUST be set to your local voltage.(optional)
BATTERY STANDBY
Connect a 9V battery (note: not supplied) into the 9V BATTERY COMPARTMENT to keep the
clock running and memorizing when the mains power is disconnected.
HEADPHONE SOCKET
This is a facility specially provided for private listening. Connect a 3.5mm Headphone Jack Plug
of your Headphones/Earphones (note: not supplied) into the HEADPHONE SOCKET, and
adjust the ROTARY VOLUME CONTROL to a desired level. During the use of headphones/
earphones, the built in speakers are automatically disconnected.
DIMMER SWITCH - TO CONTROL CLOCK BRIGHTNESS
Set the DIMMER SWITCH to HIGH or LOW location to control the brightness of the clock LED
display.
TIME SETTING
When the unit first time connect to the AC power the display will show 12:00 (CPU defaulted at
12 hr.)
1. Press and hold the CLOCK ADJ. button about 3 second .
2. Clock will change to 24:00 show on the display.
If you want change back to 12:00 hr. format please repeat step 1.
While the display is flashing, press the SKIP UP BUTTON to set the hour and press SKIP
DOWN BUTTON to set the minute. Then press the CD STOP/CLOCK ADJ. BUTTON to confirm
the time setting (press CD STOP/CLOCK ADJ. BUTTON to set again).
Note: If the PM indicator is “ON” the hour displayed is PM.