TO SET CLOCK TIME 24 HOURS
NOTE:
NOTE:
TO SET ALARM TIME
WAKE TO RADIO
WAKE TO CD MUSIC
WAKE TO ALARM
1. Press and hold Time set button.
2. While holding down Time set button ,press FORWARD and REVERSE
buttons until correct time is displayed.
3. Release these buttons when the correct time is reached.
When setting the time, be careful not to touch Snooze or Sleep button.
Touching this button will change the display time.
The PM Indicator (Optional) will be on for a 12-hour version when you
have reached 12 o'clock and enter PM time setting.
This set has dual alarms, you may set Alarm 1, to wake you at a certain time or
Alarm 2 to wake you at a different time or Alarm 1+2 to wake you at both these
different time you set.
To set Alarm 1, slide the Alarm selector to position 1.
To set Alarm 2, slide the Alarm selector to position 2.
To check alarm time, press Alarm Set button. The display will show
alarm time.
To wake at Alarm 1 time, slide Alarm selector to position 1; To wake at
Alarm 2 time, slide Alarm selector to position 2; To wake at both time,
slide to Alarm 1+2.
When setting time, be careful not to touch Snooze and/or Sleep button.
Touching these buttons will change the time.
1. Open CD Door by pressing CD Open button and place a CD into the CD
compartment.
2. Slide the CD/RADIO switch to CD.
3. Set the alarm time or check if the pre-set alarm time is correct by pressing
the Alarm set button.
4. Slide the FUNCTION switch to AUTO.
The CD will then start playing from the first track at the pre-set alarm time.
1. Set the alarm time or check if the pre-set alarm time is correct by pressing
the Alarm set button.
2. Slide the FUNCTION switch to BUZZER position.
3. Buzzer will sound at the pre-set alarm time.
Select High/Mid/Low ALARM Volume position.
5. Slide the FUNCTION switch to OFF to silence the alarm.
NOTE:
NOTE:
n
1. Turn radio on (slide Band switch to MW or FM or FM ST. position) and adjust
the Tuning and Volume control.
2. Set the alarm time or check if the pre-set alarm time is correct by pressing
the Alarm set button.
3. Slide the FUNCTION switch to AUTO.
The radio will start playing automatically at the set alarm time.
4.
n
SNOOZE FUNCTION
GOING TO SLEEP WITH MUSIC, CD OR RADIO
NOTE:
To sleep an extra 7 minutes when the Radio/Buzzer/CD comes on, lightly touch
the Snooze button, the radio or alarm or CD will stop for 7 minutes and come on
again.
The display for clock shows the minutes and seconds of the real-time clock.
Let's say, the time is 12:36; press SNOOZE button; the display shows 6:00, with
"6" as the minutes and "00" as the seconds of the clock. When a period of seven
minutes passes, the display says "3:00" (the time now is 12:43);
Radio/Buzzer/CD comes on again to wake you up.
Pressing the SLEEP button will play your Radio/CD music for the amount of
time you specify and then turn off automatically.
1. Press and hold the sleep button. The display will show 59 minutes.
2. While holding the sleep button, press the FORWARD or REVERSE button to
increase or decrease the time to the required amount.
3. The RADIO/CD will play for the time you set and shut itself off automatically.
To avoid influence on alarm pre-set time, make sure FUNCTION
switch is set to AUTO or BUZZER for alarm to come on in time.
MAINTENANCE AND CARE
CLEANING THE CABINET
CLEANING THE LENS
Dust or dry particles
Finger prints
1. Electronic products should never be subjected to extreme temperatures nor
high humidity to ensure good performance and a long life-time. The clock radio
should not be placed in bathing areas, or around stoves and radiators, etc.
Always leave sufficient space around the unit for ventilation.
2. If necessary, only clean the cabinet of the unit with a soft dampened piece of
cloth (be sure the AC power cord is unplugged from the outlet). Never use a
polish or a strong detergent for cleaning since this can damage the finish of the
cabinet.
Before cleaning ensure the unit is unplugged from the mains. Wipe with a soft cloth.
If the cabinet is very dirty, dampen the cloth with a weak solution of neutral
detergent and water, and then wipe clean.
A dirty lens will cause sound skipping and, if the lens is very dirty, the CD may not
work. Open the disc cover and clean the lens as follows:
Using a camera lens brush/blower, blow on the lens couple times, then wipe it
lightly with the brush to remove dust. Then, blow on the lens once more.
If the lens cannot be cleaned by using a brush/blower, use a dry cotton swab
starting in the middle and working to the outside edge.
7
6
