8
•
Use USB Charging socket
- Connect a USB cable (not supplied) to
USB
socket to charge your smartphone or tablet PC.
•
Uses of Qi (wireless charging)
- This function only works with mobile devices that support
Qi
technology.
- Put your device with the backside to the logo, the device screen is informing you about the charging status.
Note:
It can be happen that the DAB & FM radio reception is affected while charging the device with Qi
technology.
Set the Clock
Synchronization the Clock
1. In the standby mode, press and hold the
MENU
button on the remote control for few seconds, then
the unit will enter the CLOCK SYNC mode.
2. Press the
p
/
q
buttons on remote control or
+
/
*
buttons on the to switch the clock synchronization
modes:
•
RDS
Only synchronize with the RDS radio station.
•
OFF
Turn off the clock synchronization function, only adjust the clock manually.
3. Then press the
%)
button on the unit or the
%)
/PAIR
button on the remote control to confirm.
Manual Setting the Clock
1 In STANDBY mode, press and hold the
CLOCK
button on the remote control or the
SNOOZE/DIMMER
button on the main until the hour indicator blinks.
2 Set the hour with
p
/
q
button on remote control or
+
/
*
button on main unit.
3 Press the
CLOCK
button on remote control or
SNOOZE
button on main unit to confirm.
4 Repeat steps 2-3 to set the minutes.
Note:
During Time Setup, press the
%)
button to select 12/24 hour format.
