UR2195 / English Instruction Manual
4
Getting start
Power Up
When device connect to power and it’s powered up first time, Automatic update function will start
automatically and scrolling text “Update, Please Wait ” is display on LCD,
it may need few
minutes depends signal strength and device working environment , when signal was received,
the right time should be display on LCD accordingly. To terminate it, press any key during the
period
When the automatic system setting had been terminate by user or update un-succeed, the date
and clock are defaulted to 01.01.2016 , 0:00
The all alarms are defaulted to 0:00
The unit is switched to clock auto-run mode
Default back light automatically set to dim from 23:00 to 05:59 unless you set the auto dimmer to
OFF
Setup Device
When Auto-Run Mode, Press <
Info
> once will entry to setting mode, the LCD display should be
show as below:
Use <
> or <
> go to different mode sequentially as below
Device running as auto-run
Set Clock
Set the Calendar
Set the SDA
Set 12/24 hour
Set Alarm
Auto Dimmer
Update Time
Factory Reset
