UR210 / English Instruction Manual
2
GETTING STARTED
1.
Connect the cord of the power adapter to
the DC IN jack of the radio.
2.
Connect the plug of the power adapter to
a wall socket.
The radio is powered and in standby mode
when you see the display is switched on.
Power on or off
1. Press the
/”SOURCE” button (4) in standby mode to turn the radio on.
2. Press and hold the
/”SOURCE” button (4) when the radio is turned on to switch it to
standby mode. The time and date show on the display in standby mode.
To completely disconnect the radio from power, remove the plug of the power adapter from the
wall socket.
Setting the clock
The date and time of the radio is automatically set once it receives radio broadcast signals (and
when such info is available). You may also set the date and time through the setting menu. To
do so:
1. Press the
/”SOURCE” button (4) to turn the radio on.
2. Press and hold the
“MENU” (3) button.
3. Press the or button (8/5)
until you see “System” on
the display and then press the
“SELECT” button.
4. Press the or button (8/5)
until you see “Time” on the
display and then press the
“SELECT” button.
5. Press the or button (8/5)
until you see “Set Time/Date” on the display and then press the
“SELECT” (6) button.
6. Press the or button (8/5) to set hour time and then press the
“SELECT” button (6) to
confirm.
7. Repeat step 6 to continue setting minute time, date, month and year.
For more date and time settings, see chapter “Time”.
Using the antenna
Unroll and extend the antenna to improve DAB/ FM signal reception.
Controlling the volume
Press the
or
button (1/7) to adjust the volume.
