SOUNDMASTER UR2050, Руководство пользователя

Страница: 6 / 12

UR2050 operating instruction of English
1. Start the device
When unit is powered up first time, Automatic update function will start automatically and
“ PLEASE WAIT FOR SETTING THANKS “is flashing on LCD, When press any key to terminate
this function.
Note: When unit is powered up first time, Automatic update function will start
automatically in 3~5 minutes. If the signal is received, time display on LCD accordingly
When the automatic system setting had been terminate by user, the date and clock are
defaulted to
01.01.2012 ,0:00.
•
The alarms are defaulted to 0:00,
•
The unit is switched off
•
The unit is standby mode
•
Default back light automatically set to dim from 23:00 to 05:59
2. How to setup device
When Radio Off (Auto-Run Mode), Press < MODE > once go to different mode sequentially
Auto-run Mode with Clock display
1
．
Set the Clock
2
．
Set the Date
3
．
Set the SDA
4
．
Set update switch
5
．
Set dimmer work Mode
6
．
Set auto dimmer timer switch
7
．
Set start time of auto dimmer
8
．
Set end time of auto dimmer
9
．
Set Display mode (12/24 hour)
2.1 Set the clock
2.1.1 Press < Mode > once when the unit stays in clock display mode
2.2.2 The clock goes flashing
2.2.3 Press < UP > to advance the clock by 1 minute
2.2.4 Press < Down > to move the clock back by 1 minute
2.2.5 Press and hold < UP > or < Down > to set the clock in fast mode of 10 minutes per step
2.2.6 Press < Mode > once to go to set the date.
4 Of 10